DIN  Fastener

DIN-Cap nuts
DIN-Castle nuts
DIN-Clevis pins
DIN-Clevis pins
DIN-Knurled nuts
DIN-Shim rings
DIN-Slotted head screws
DIN-Square head bolts
DIN-Square nuts
DIN-Tapping screws
DIN-Thread forming screws
DIN-Washers for use in structural steelwork
DIN-Weld nuts
DIN-Weld screws
DIN-Wood screws
DIN-Cross recessed head screws
DIN-Double end studs
DIN-Pins
DIN-Nails
DIN-Hexagon head bolts and screws
DIN-Hexagon head bolts and screws for use in DIN-Structural steelwork
DIN-Drilling screws with tapping screw thread
DIN-Split pins
DIN-Plain washers
DIN-Hexalobular head bolts
DIN-Prevailing torque type nuts
DIN-Sepcial washers
DIN-Miscellaneous bolts and screws
DIN-Miscellaneous nuts
DIN-Retaining rings
DIN-Keys

DIN 1-100
DIN 1 - Taper Pins
DIN 7 - Dowel Pins
DIN 84 A - Slotted Cheese Head Machine Screws
DIN 85 A - Slotted Pan Head Machine Screws
DIN 93 - Tab Washers With Long Tab
DIN 94 - Cotter Pins
DIN 95 - Slotted Oval Head Machine Screws
DIN 96 - Slotted Round Head Wood Screws
DIN 97 - Slotted Flat Head Wood Screws

DIN 101-200
DIN 125 A - Flat Washer Without Chamfer
DIN 125 B - Flat Washer With Chamfer
DIN 126 - Grade C Flat Washer Without Chamfer
DIN 127 A - Split Lock Washer With Bend Ends
DIN 127 B - Split Lock Washer With Flat Ends
DIN 128 A - Split Spring Washers, Curved
DIN 128 B - Split Spring Washers, Waved
DIN 137 A - Spring Washer, Curved
DIN 137 B - Spring Washer, Waved
DIN 186 A - Tee-Head Bolts With Square Head
DIN 188 - Tee-Head Bolts With Double Nip
DIN 193
DIN 196

DIN 301-400
DIN 315 - Wing Nuts
DIN 316 - Wing Screws

DIN 401-500
DIN 404 - Slotted Drilled Fillister Head Screws
DIN 417 - Slotted set screws with full dog point
DIN 427 - Slotted Headless Screws
DIN 431 - Jam Nut, Hexagonal
DIN 432 - External Tab Washer
DIN 433 - Flat Washer With Reduced O.D.
DIN 434 - Square Bevel Washer: 8%
DIN 435 - Square Bevel Washer: 14%
DIN 436 - Square Washer
DIN 438 - Slotted set screws with cup point
DIN 439 A - Hexagon Nuts - 0,5d Unchamfered
DIN 439 B - Hexagon Nuts - 0,5d Chamfered
DIN 444 A - Eye Bolts
DIN 462 - Internal Tab Washers
DIN 463 - Tab Washers With Long And Short Tab
DIN 464 - Knurled Thumb Screws
DIN 466 - Knurled Nuts, Full
DIN 467 - Flat Knurled Nuts
DIN 470 - Sealing Washers
DIN 471 - External Retaining Rings
DIN 472 - Internal Retaining Rings
DIN 478 - Square Head Bolts
DIN 479 - Square Head Bolts
DIN 480 - Square Head Bolts

DIN 501-600
DIN 525 - Weld Studs With Hexagon Nuts
DIN 529 A - Anchor Bolts (Stone Bolt)
DIN 529 B - Anchor Bolts (Stone Bolt)
DIN 529 C - Masonry Bolts With Hexagon Nuts
DIN 529 D - Anchor Bolts (Stone Bolt)
DIN 529 E - Foundation Bolts With Hexagon Nuts
DIN 529 F - Anchor Bolts (Stone Bolt)
DIN 529 G Bolt
Din 546 - Slotted Round Nut
DIN 547 - Round nuts with drilled holes in one face
DIN 548 - Round nuts with set pin holes in side
DIN 551 - Slotted Set Screws With Flat Point
DIN 553 - Slotted Set Screws With Cone Point
DIN 555 - Hexagon Nuts - 0,8d
DIN 557 - Square Nuts
DIN 558 - Fully Threaded Maching Bolts
DIN 562 - Square Thin Nuts
DIN 571 - Hexagon Lag Screws
DIN 580 - Lifting Eye Bolts
DIN 582 - Lifting Eye Nuts

DIN 601-700
DIN 601- Hexagon head bolt with nut
DIN 603 - Carriage Bolts With Hexagon Nuts
DIN 604 - Flat Countersunk Nip Bolts With Hex Nuts
DIN 605 - Flat Countersunk Square Neck Bolts
DIN 607 - Round Head Nip Bolts With Nuts
DIN 608 - Countersunk Square Bolts (Short Neck)
DIN 609 - Hex Fitting Bolts w/long Threaded Portion
DIN 610 - Hex fitting Bolts w/short Threaded Portion
DIN 653 - Flat Knurled Thumb Screws
DIN 660 - Round Head Rivets
DIN 661 - Countersunk Head Rivets

DIN 701-800
DIN 705 A - Shaft Collars

DIN 801-900
DIN 835 Fo - Studs, Tap Ends - 2d

DIN901-1000
DIN 906 - Hexagon Socket Pipe Plugs
DIN 908 - Hexagon Socket Screw Plugs
DIN 910 - Hexagon Head Screw Plugs
DIN 911 - Hexagon Socket Screw Keys
DIN 912 - Socket Head Cap Screws
DIN 913 - Socket Set Screws With Flat Point
DIN 914 - Socket Set Screws With Cone Point
DIN 915 - Socket Set Screws With Dog Point
DIN 916 - Socket Set Screws With Cup Point
DIN 917 - Hexagon Cup Nuts - Low Pattern
DIN 920 - Slotted Pan Head Screws, Small Head
DIN 921 - Slotted pan head screws with large head
DIN 923 - Slotted Pan Head Screws With Shoulder
DIN 927 - Slotted Shoulder Screws
DIN 928 - Square Weld Nuts
DIN 929 - Hexagon Weld Nuts
DIN 931 - Hexagon Cap Screws Partially Threaded
DIN 933 - Hexagon Cap Screws Fully Threaded
DIN 933 Sz - Hexagon Cap Screws With Slot
DIN 934 - Hexagon Nuts - 0,8d
DIN 935 - Castle Nuts
DIN 936 - Hexagon Jam Nuts
DIN 937 - Hexagon Thin Slotted And Castle Nuts
DIN 938 - Studs - Metal end ≈ 1 d.htm
DIN 939 - Studs, Tap End - 1,25d
DIN 960 - Hex Cap Screws, Metric Fine Thread - Part Thread
DIN 961 - Hex Cap Screws, Metric Fine Thread - Full Thread
DIN 963 A- Slotted Flat Head Machine Screws
DIN 964 A- Slotted Oval Head Machine Screws
DIN 965 A - Cross Recessed Flat Head Machine Screws
DIN 966 A - Cross Recessed Oval Head Machine Screws
DIN 980 V - Self-Locking Nuts; All Metal Conctruction
DIN 982 - Self- Locking Nuts w/nylon Insert: Heavy Series
DIN 985 - Self Locking Nuts w/locking Insert: Standard Series
DIN 986 - Self Locking Domed Cap Nuts With Nylon Insert
DIN 988 - Shim Washers

DIN 1001-2000
DIN 1052
DIN 1440 - Flat Washers With Clevis Pins, Medium
DIN 1441 - Flat Washers For Clevis Pins, Coarse
DIN 1473 - Grooved Pins Full Length Paralled Grooved
DIN 1475 - Grooved Pins Third Length Center Grooved
DIN 1476 - Round Head Grooved Pins
DIN 1477 - Flat Countersunk Head Grooved Pins
DIN 1480 - Turnbuckles
DIN 1481 - Spring Ppins, Heavy Duty
DIN 1587 - Hexagon Domed Cap Nuts, Full Pattern
DIN 1804 w - Slotted Round Nuts

DIN 2001-3000
DIN 2093 A,B,C - Dics Springs (Belleville Type)
DIN 2338 - Parallel Pin
DIN 2339
DIN 2509 - Double end studs
DIN 2510

DIN 3001-3999
DIN 3570 - U Bows U Bolts

DIN 6001-7000
DIN 6319 - C D G Spherical washers and conical seats
DIN 6325 - Parallel Pins Hardened
DIN 6332 - Grub screws with thrust point
DIN 6334 - Hexagon Nuts - 3d
DIN 6796 - Conical Spring Washers (Belleville Type)
DIN 6797 A+J - Internal/External Tooth Lock Washers
DIN 6797 AZ - Tooth Lock Washers (Type AZ)
DIN 6798 A+J - Serrated Lock Washers
DIN 6798 AZV - Serrated Lock Washers (type AZV)
DIN 6798 V - 90degree Countersunk Serrated Lock Washers
DIN 6799 - Circlips For Shafts
DIN 6885 A - Parallel Keys, Round Ended
DIN 6885 B - Parallel Keys, Square Ended
DIN 6911 - Hexagon Socket Screw Keys With Pilot
DIN 6912 - Low Head Socket Cap Screws With Pilot
DIN 6914 - Hex Bolts For High Strength Struct. Bolting
DIN 6915 - Hex Nuts For High Strength Struc. Bolting
DIN 6916 - Washers For High Strength Structural Bolting
DIN 6917 - Square taper washer for -sections 14%
DIN 6918 - Square taper washer for U-sections
DIN 6921 - Hex Flange Bolts
DIN EN 1665 Hexagon bolts with flange - heavy series(Replace DIN 6922)
DIN 6923 - Hexagonal Flange Nuts
DIN 6924 Prevailing torque type hexagon nut with nylon insert ISO 7040
DIN 6925 - Prevailing torque type hexagon nut all metal
DIN 6926 - Self-Locking Hex Flange Nuts: Non Metallic Insert
DIN EN 1663 - Prevailing torque type hexagon nuts with flange with non-metallic insert

DIN 7001-8000
DIN 7338 - Rivets for brake linings and clutch linings
DIN 7343 - Coiled Pins, Medium Duty
DIN 7349 - Flat Washers With Large Ext. Diameter
DIN 7500AE - Slotted cheese head thread rolling screws
DIN 7500BE - Slotted pan head thread rolling screws
DIN 7500C - Metric pan head triangle lock screws
DIN 7500CE - Cross recessed pan head thread rolling screws
DIN 7500DE - Hexagon head thread rolling screws
DIN 7500E - Socket hexagon cheese head thread rolling screws
DIN 7500KE - Slotted rasied countersunk thread rolling screws
DIN 7500LE - Slotted rasied countersunk thread rolling screws
DIN 7500ME - Cross recessed countersunk head thread rolling screws
DIN 7500NE - Cross recessed raised countersunk head thread rolling screws
DIN 7500OE - Hexalobular socket cheese head thread rolling screws
DIN 7500PE - Hexalobular socket pan head thread rolling screws
DIN 7500QE - Hexalobular socket raised countersunk head thread rolling screws
DIN 7504 - N P K head self drilling screws
DIN 7968 - Hexagon fit bolts with hexagon nut for steel structures
DIN 7969 - Slotted countersunk head bolts with hexagon nut for steel structures
DIN 7970 - Tapping screw threads
DIN 7978 A - Taper PIns With Internal Thread
DIN 7979 D - Dowel Pins With Internal Thread
DIN 7980 - Hi-Collar Lock Washers
DIN 7981 B(BZ) - Cross Recessed Pan Head Tapping Screws
DIN 7982 B - Cross Rec. Flat hd Tapping Screws, hd Angle 80
DIN 7983 B - Cross Rec. Oval hd Tapping Screw, hd Angle 80
DIN 7984 - Socket Low Head Cap Screws
DIN 7985 A - Cross Recessed Pan Head Machine Screws
DIN 7985 Z1 - Cr. Rec. Pan Head Screws w/captive Flt. Washer
DIN 7985 Z4 - Cr. Rec. Pan Head Screws w/captive l/washer
DIN 7989 A - Washers For Steel Constructions
DIN 7991 - Flat Socket Head Cap Screws
DIN 7997 - Cross recessed countersunk head wood screws
DIN 7998 - Threads and Thread Ends for Wood Screws

DIN 9001-9999
DIN 9021
DIN 9250 Safety lock serrate washer

DIN EN 22339 - Unhardened Taper Pins (Replace DIN 1)