DIN 582 - Lifting Eye Nuts

Thread(d1)	M8	M10	M12	M16	M20	M24	M30	M36	M42	M48	M56	M64	M72*6	M80*6	M100*6
d2	20	25	30	35	40	50	65	75	85	100	110	120	150	170	190
d3	36	45	54	63	72	90	108	126	144	166	184	206	260	296	330
d4	20	25	30	35	40	50	60	70	80	90	100	110	140	160	180
e	8.5	10	11	13	16	20	25	30	35	40	45	50	60	70	80
h	36	45	53	62	71	90	109	128	147	168	187	208	260	298	330
k	8	10	12	14	16	20	24	28	32	38	42	48	60	68	75
m	10	12	14	16	19	24	28	32	38	46	50	58	72	80	88
r	4	4	6	6	8	12	15	18	20	22	25	25	35	35	40
Mini Breaking Load,in Kn	8.4	13.8	19.8	41.4	70.8	106	188	270	372	504	678	942	1180	1650	2350
Maximum Lifting Capacity with One String in kgs	140	230	340	700	1200	1800	3200	4600	6300	8600	11500	1600	20000	28000	40000
Maximum Lifting Capacity with two String (45 degree)in kgs	100	170	240	500	860	1290	2300	3300	4500	6100	8200	11000	14000	20000	29000

DIN 501-600
DIN 525 - Weld Studs With Hexagon Nuts
DIN 529 A - Anchor Bolts (Stone Bolt)
DIN 529 B - Anchor Bolts (Stone Bolt)
DIN 529 C - Masonry Bolts With Hexagon Nuts
DIN 529 D - Anchor Bolts (Stone Bolt)
DIN 529 E - Foundation Bolts With Hexagon Nuts
DIN 529 F - Anchor Bolts (Stone Bolt)
Din 546 - Slotted Round Nut
DIN 547 - Round nuts with drilled holes in one face
DIN 548 - Round nuts with set pin holes in side
DIN 551 - Slotted Set Screws With Flat Point
DIN 553 - Slotted Set Screws With Cone Point
DIN 555 - Hexagon Nuts - 0,8d
DIN 557 - Square Nuts
DIN 558 - Fully Threaded Maching Bolts
DIN 562 - Square Thin Nuts
DIN 571 - Hexagon Lag Screws
DIN 580 - Lifting Eye Bolts
DIN 582 - Lifting Eye Nuts