DIN 6332 - Grub screws with thrust point

Type SK with internal hexagon, thrust point hardened

Type SK with internal hexagon, thrust point hardened

The thrust point of these screws DIN 6332 is designed to be used with or without the thrust pad for clamping. The snap ring resp. spring is a simple and quick method to connect the thrust pad to the grub screw. Through the combination of grub screws DIN 6332 with various handles or knobs, simple clamping screws can be created. Grub screws GN 913.3(with brass or plastic pad) Thrust padsDIN 6311 Thrust padsGN 6311.1

DIN 6001-7000
DIN 6319 - C D G Spherical washers and conical seats
DIN 6325 - Parallel Pins Hardened
DIN 6332 - Grub screws with thrust point
DIN 6334 - Hexagon Nuts - 3d
DIN 6796 - Conical Spring Washers (Belleville Type)
DIN 6797 A+J - Internal/External Tooth Lock Washers
DIN 6797 AZ - Tooth Lock Washers (Type AZ)
DIN 6797 IZ - Tooth Lock Washers (Type JZ)
DIN 6797 AZV - Tooth Lock Washers (Type AZV)
DIN 6798 A+J - Serrated Lock Washers
DIN 6798 AZV - Serrated Lock Washers (type AZV)
DIN 6798 V - 90degree Countersunk Serrated Lock Washers
DIN 6799 - Circlips For Shafts
DIN 6885 A - Parallel Keys, Round Ended
DIN 6885 B - Parallel Keys, Square Ended
DIN 6911 - Hexagon Socket Screw Keys With Pilot
DIN 6912 - Low Head Socket Cap Screws With Pilot
DIN 6914 - Hex Bolts For High Strength Struct. Bolting
DIN 6915 - Hex Nuts For High Strength Struc. Bolting
DIN 6916 - Washers For High Strength Structural Bolting
DIN 6917 - Square taper washer for -sections 14%
DIN 6918 - Square taper washer for U-sections
DIN 6921 - Hex Flange Bolts
DIN EN 1665 Hexagon bolts with flange - heavy series(Replace DIN 6922)
DIN 6923 - Hexagonal Flange Nuts
DIN 6924 Prevailing torque type hexagon nut with nylon insert ISO 7040
DIN 6925 - Prevailing torque type hexagon nut all metal
DIN 6926 - Self-Locking Hex Flange Nuts: Non Metallic Insert
DIN EN 1663 - Prevailing torque type hexagon nuts with flange with non-metallic insert