Silence check valve consists of valve body,seat,diversion shuttle,disc,bearing and spring etc..The bore is flow-line designed so pressure loss is very little.The disc’s stroke is very short and when stop the pump the valve can close quickly and prevent the great noise from water-hammering so the valve can close quietly without any noise .It is widely used in feeding/draining system,fire protection and heat supplying system,and it is installed at the outlet of the pump to prevent backward fluid’s and water-hammering’s damage to the pump.

Main technical parameters

Nominal pressure: 1.0-2.5MPa
Nominal diameter: 50-350mm
Service:water,oils,sea water,sewage
Working temperature:0-80
Flanged end: GB/T17241.6 GB9113
Inspection and test: GB/T 13927 API 598

Typical installation diagram

Material

Main dimensionsunit:mm